Kohler Wall/Ceiling Mount Faucet K-922/K-923 User Manual download pdf (Page 7)

4. Install the Spout – Wall Installation

Install a 2x4 for spout support so it lays ﬂush against the top

support of the drip tray. If the drip tray is installed, the spout

center must be 7-5/8″ (19.4 cm) from the drip tray mounting

studs. If the drip tray is not installed, the spout center must be

14-16″ (35.6-40.6 cm) from the deck of the bathing ﬁxture.

NOTE: When 2x6 wall studs are present, the front of the 2x4 must

be ﬂush with the front of the wall stud.

Install a 1x3 so it is 4″ (10.2 cm) above the 2x4 and inset 3/8″ (1

cm) from the back of the studs. The larger side of the 1x3 must

face outward.

NOTE: When 2x6 wall studs are present, install the 1x3 so it is

2-3/8″ (6 cm) from the back of the wall stud.

Place the spout assembly into position. Verify that the spout and

drip tray mounting plate (if installed) are centered.

Remove the boot cap from the end of the intake pipe.

Remove the mounting sleeve and cartridge.

Spout

Assembly

Intake

Pipe

Valve Outlet Tubing

Pipe Strap

7-5/8"

(19.4 cm)

(10.2 cm)

3/8"

(1 cm)

2x4

1x3

Kohler Co. 7 1006741-2-G

1 2 3 4 5 6 7 8 9 10 11 12 ... 35 36

No comments

Kohler Wall/Ceiling Mount Faucet K-922/K-923 User Manual Page 7