Kohler K-2356-8-96 Installation Guide download pdf (Page 4)

2. Install the Lavatory

CAUTION: Risk of personal injury or product damage. Handle

with care. Product can break, chip or cause injury if handled

carelessly. Get help lifting the lavatory.

Cut out the countertop opening by carefully following the pencil

line traced from the template.

Temporarily position the lavatory in the opening. Adjust the ﬁt of

the lavatory.

Remove the lavatory from the countertop.

Install the faucet and the drain to the lavatory according to the

manufacturer’s instructions.

Carefully position the lavatory in the cut-out.

Apply a thin, continuous bead of sealant around the lavatory

edges. Immediately wipe away any excess sealant.

Fill any voids between the lavatory and the cut-out with sealant.

Verify that the lavatory has not moved out of position.

Allow the sealant to cure for at least 30 minutes before

proceeding.

Connect and tighten the trap to the drain, and complete the water

supply connections to the faucet according to the instructions

packed with the faucet.

Run water into the lavatory and check for leaks.

Clean up with a non-abrasive cleaner.

Sealant

1018888-2-E 4 Kohler Co.

1 2 3 4 5 6 7 8 9 ... 15 16

No comments

Kohler K-2356-8-96 Installation Guide Page 4