Kohler K-4917-0 Installation Guide download pdf (Page 4)

2. Install the Urinal

Reference the installation template to properly position each wall

hanger at its proper vertical dimension above the outlet hole. To

allow for vertical adjustment, place the initial screws through the

center of the slots on the hangers.

Apply thread sealant tape to the pipe threads on the drain and

install the collar to the drain.

Place the gasket onto the collar with the beveled surface facing

away from the collar.

CAUTION: Risk of personal injury or product damage. Handle

with care. Vitreous china can break or chip if the product is

handled carelessly.

Carefully position the urinal on the wall hangers.

Verify the urinal is properly positioned, then remove the urinal

from the wall.

NOTE: If adjustment is necessary, make vertical adjustments along

the slots on each wall hanger until the urinal can be tightened to the

collar.

Install the permanent screws into the holes on the wall hangers,

as shown on the installation template.

Secure the urinal to the collar using the washers and bolts

provided.

Apply sealant

tape.

Strainer

Gasket

Bolt

Washer

Collar

Drain

Installed Wall Hangers

Wall

Wall Hangers

1048744-2-B 4 Kohler Co.

1 2 3 4 5 6 7 8 9 ... 15 16

No comments

Kohler K-4917-0 Installation Guide Page 4