Kohler K-960-4-CP Installation Guide download pdf (Page 10)

8. Handle Valve Installation

Remove and save the dished washer and nut from the end

bodies.

Install a ﬂexible hose to each valve body outlet. Tighten securely,

but do not overtighten.

Apply a bead of plumbers putty or other sealant to the underside

of the escutcheons according to the putty manufacturer’s

instructions.

NOTE: The end body marked ″COLD″ with blue lettered tape

attached to the tube should be installed to the right of the faucet.

Insert the end bodies into the proper mounting holes.

From the underside of the bidet, slide a dish washer, washer, and

nut onto each end body.

Rotate each end body until the copper tubing faces toward the

outside of the bidet and the outlets face each other.

Firmly hold the end bodies in place and then securely tighten the

nuts with a wrench. Do not overtighten.

Remove any excess putty or sealant.

Dish

Washer

End Body

Outlet

Washer

Nut

End Body

Hose

O-Ring

Dish

Washer

Escutcheon

Apply

Plumbers

Putty.

End Body

Nut

Washer

1009770-2-B 10 Kohler Co.

1 2 ... 5 6 7 8 9 10 11 12 13 14 15 ... 47 48

No comments

Kohler K-960-4-CP Installation Guide Page 10