Kohler K-101-PB Installation Guide download pdf (Page 14)

11. One-Piece Lever Handle Installation

Verify that the valves are in the closed position.

Insert the handle onto the stem extension so the handle is

positioned horizontally.

Verify that the handle is in an even horizontal position. If needed,

remove the handle and adjust its position on the splines of the

stem extension until horizontal. For ﬁne adjustment, pull out the

stem extension until it disengages from the valve, rotate, and

return it to its original position. Do not pull the stem extension

completely out.

NOTICE: Risk of product damage. Do not overtighten.

Overtightening will damage the handle.

Insert the stem screw into the stem extension and tighten with a

screwdriver.

Repeat for the other handle.

Open

Hot Cold

Lever

Handle

Stem

Extension

Stem

Screw

Bonnet

Shown in Closed Position

1008209-2-G 14 Kohler Co.

1 2 ... 9 10 11 12 13 14 15 16 17 18 19 ... 51 52

No comments

Kohler K-101-PB Installation Guide Page 14