Kohler K-11344-G-0 Installation Guide download pdf (Page 11)

7. Secure the Drain to the Bath

CAUTION: Risk of property damage. Make sure a watertight seal exists on all bath drain

connections.

CAUTION: Risk of product damage. Do not kink or cause damage to the cable on the bath drain during

installation.

Remove the drain from the bath shell.

Secure the Drain Elbow

Apply plumbers putty to the underside of the ﬂange.

Set the ﬂange on top of the drain outlet of the bath.

Apply silicone sealant to the underside of the drain gasket, then place the drain gasket on top of the

drain elbow.

Insert the nut through the center of the ﬂange and onto the threaded cylinder in the drain elbow.

Handtighten the nut onto the threaded cylinder. Do not wrench tighten at this time.

Remove any excess putty around the ﬂange.

Secure the Overﬂow Elbow

Align the overﬂow elbow to the outside of the overﬂow outlet of the bath.

Insert the nut through the recessed side of the backplate.

Insert the nut with backplate onto the threaded cylinder of the overﬂow elbow.

Turn the nut clockwise until hand-tight to secure the nut with backplate to the threaded cylinder.

Do not wrench tighten at this time.

Drain Outlet

Drain Gasket

Threaded Cylinder

Overflow Elbow

Overflow Seal

Overflow Outlet

Nut

Backplate

Drain Elbow

Flange

Nut

Apply plumbers putty.

Kohler Co. 11 1220597-2-A

1 2 ... 6 7 8 9 10 11 12 13 14 15 16 ... 43 44

No comments

Kohler K-11344-G-0 Installation Guide Page 11