Kohler Electric Shower User Manual download pdf (Page 23)

Operation Instructions

Note! Read the Important Safety Information section first.

WARNING! The spray plate holes must be kept clear. The spray plate should be

regularly removed and cleaned in descalent. Lack of regular spray plate cleaning will

lead to poor performance and cause early failure of the appliance. See the shower

fittings User Guide for more information.

To turn the shower on

1. Switch on the electrical supply at the double pole

switch.

2. Turn the power knob to High. Wait 15–20 seconds

for warm water to reach the handset.

For electrical economy, set the power knob to

Medium. This setting will provide sufficient power

when the supply water temperature is warmer,

such as in the summer.

For an unheated shower, set the power knob to

Low.

To set the shower temperature

1. Set the shower temperature by rotating the

temperature knob as necessary. Turn the knob

clockwise for hotter water and anticlockwise for

cooler water. Wait 10–15 seconds for the adjusted

temperature to reach the handset.

Note! It is normal for the flow rate to change when

the temperature is changed.

Note! If the water temperature cycles between hot

and cold, the temperature is set too high. This is

causing the thermal switch to turn off the heating

element to reduce the water temperature. Turn

the temperature knob anticlockwise to reduce the

water temperature.

Cooler

Hotter

1 2 ... 18 19 20 21 22 23 24 25 26 27 28 ... 43 44

No comments

Kohler Electric Shower User Manual Page 23