Kohler K-1167-GVL-K4 Installation Guide download pdf (Page 3)

Tools and Materials

Before You Begin

NOTICE: Adequate ﬂoor support must be provided. Note the model number on the back of the bath,

then visit the product page at www.kohler.com for additional information.

NOTICE: Do not support the load weight of the bath by the rim.

NOTICE: Verify adequate support if installing a rim- or deck-mount faucet. Large faucets that may be

inadvertently used as a means of support are not safe for this installation.

NOTICE: Provide adequate ventilation and a minimum 15 cubic feet (.4 cubic meters) of air space in the

installed location for cooling the motor, and to supply sufficient air for the blower. Do not install the

blower motor closer than 1″ (25 mm) from the wall or other objects.

Unpack and inspect the bath for damage. Return the bath to the carton until installation.

Read these instructions and determine the locations for all required components before beginning

installation.

Provide access to the control ampliﬁer connections, control board connections, and blower motor for

servicing.

This bath is designed for three-side alcove installation.

The control ampliﬁer may be installed remotely, and includes a 25’ (7.6 m) cable.

Use conduit to route electrical wires from the circuit breaker.

Choose the location for a battery operated auxiliary audio device, if used. Do not locate AC

powered devices within reach of the bath.

Carefully plan moving the bath into the installation area. This bath will not easily ﬁt through

doorways.

Install this bath on a level subﬂoor. Shims may be needed if the subﬂoor is uneven.

This bath conforms to CSA B45.5/IAPMO Z124. All dimensions are nominal.

• Conventional woodworking tools and materials

• 2x4s

• Conduit

• Drop cloth

• Mortar cement (Optional)

• Construction adhesive (Optional)

• Felt Strips

Plus:

Tin Snips

100% Silicone Sealant

Kohler Co. 3 1212245-2-B

1 2 3 4 5 6 7 8 ... 75 76

No comments

Kohler K-1167-GVL-K4 Installation Guide Page 3