Kohler K-6228-C15-BV Installation Guide download pdf (Page 6)

1. Install the Supplies

IMPORTANT! The diagram illustrates a right side handle installation. The supply

can also be installed with the handle on the left side.

CAUTION: Risk of property damage. When installing the handle on the right side,

connect the supplies to the mixer valve with the cold supply line plumbed on the left

and the hot supply line plumbed on the right. When installing the handle on the left

side, connect the supplies to the mixer valve with the cold supply line plumbed on

the left and the hot supply line plumbed on the right. Disregard the cold label on the

mixer valve.

Install 1/2″ supply lines to the mixer valve with the cold supply on the left and

the hot supply on the right.

Temporarily remove and retain the plaster guard/retaining ring tool and spout

plug.

Position a bucket in front of the spout shank, then turn on the water supplies to

the mixer valve.

Slowly open the mixer valve stem. Allow hot and cold water to ﬂow from the

water supplies for approximately one minute to remove any debris.

Close the mixer valve stem. Carefully inspect all connections for leaks.

Reattach the plaster guard/retaining ring tool and spout plug.

Installer les alimentations

IMPORTANT! Le diagramme illustre une installation de poignée sur le côté droit.

L’alimentation peut également être installée avec la poignée sur le côté gauche.

Hot Supply

Alimentation chaude

Suministro de agua caliente

Cold Supply

Alimentation froide

Suministro de agua fría

Plaster Guard/

Retaining Ring Tool

Renfort en plâtre/

Outil d'anneau de retenue

Herramienta para protector de

yeso/anillo de retención

Spout Plug

Bouchon de bec

Tapón del surtidor

Mixer Valve Assembly

Mitigeur

Montaje de la válvula mezcladora

1095311-2-G 6 Kohler Co.

1 2 3 4 5 6 7 8 9 10 11 ... 27 28

No comments

Kohler K-6228-C15-BV Installation Guide Page 6