Kohler K-T16124-4-BN Installation Guide download pdf (Page 6)

4. Install Handles

Remove the plaster guards.

Remove and discard the threaded sleeves.

Press a stem extension onto each valve stem.

NOTE: A spline adapter is provided in addition to the stem

extension, and is the shorter of the two pieces. The spline adapter

will not be used in deck and bath-mount installations.

Press the handle loosely onto the spline adapter, and check the

alignment of the handle.

For further alignment, remove the handle, and reposition the

spline adapter on the valve stem until the handle alignment is

correct.

Apply a ring of plumbers putty or other sealant around the

underside of the handle skirt according to the manufacturer’s

instructions.

Thread the skirt of each handle onto each valve.

5. Complete the Installation

Turn off the water (hot = clockwise, cold = counterclockwise).

Remove the aerator assembly.

Turn on the main water supply and check for leaks.

Discard Sleeve.

Stem Extension

ValveBody

Valve Stem

Stem Extension

Handle and

Skirt (Lever

Handle Shown)

Apply plumbers

putty.

113341-2-BD 6 Kohler Co.

1 2 3 4 5 6 7 8 9 10 11 ... 23 24

No comments

Kohler K-T16124-4-BN Installation Guide Page 6