Kohler K-16158-BN Installation Guide download pdf

TOOLS AND MATERIALS REQUIRED:

 Tape measure

 Screwdrivers

 Level (24” or longer)

 Pencil

 1/8” hex wrench

 #12 wood screws (minimum)

ROUGHING-IN:

INSTALLATION:

WARNING: Risk of severe personal injury.

Minimum 1/2” plywood or 2x4 studding is

required to ensure safe mounting support for

this grab bar. Refer to ASTM F446 for additional

information.

1. Determine the required location for the grab bar

installation, and mark the finish wall surface

accordingly.

NOTE: Use care to avoid scratching the product

finish.

2. Slip an escutcheon onto each end of the grab bar.

3. Handtighten a bracket onto each end of the grab bar.

4. Ensure that the grab bar is plumb or level, as

required. Then secure the brackets to the wall with

minimum #12 wood screws. Do not use drywall

screws.

5. Slide the escutcheons flat against the wall, and

secure by tightening the setscrews. Do not

overtighten.

114696-2-BB



REVIVAL GRAB BAR

K-16156

K-16158

2000 Kohler Co.

2-5/8”

3” D.

K-16156=12”

Fig. #1

K-16158=18”

Bracket

Setscrew

Grab Bar

Escutcheon

Fig. #2

Summary of Contents

Page 1 - INSTALLATION:

TOOLS AND MATERIALS REQUIRED: Tape measure Screwdrivers Level (24” or longer) Pencil 1/8” hex wrench #12 wood screws (minimum)ROUGHING-IN:INSTAL

Comments to this Manuals

No comments

Kohler K-16158-BN Installation Guide

Browse online or download Installation Guide for Unknown Kohler K-16158-BN. KOHLER K-16158-BN Installation Guide User Manual

Summary of Contents

Comments to this Manuals

Related products and manuals for Unknown Kohler K-16158-BN