Kohler K-2393-WH Installation Guide download pdf (Page 3)

1. Preparation

NOTE: The lavatory center must be located at least 12″ (30.5 cm)

from the wall.

Cut out the template along the inside line labeled ″Cut-Out.″

Position the template on the countertop in the desired location.

Make sure the template is secured ﬁrmly in place so it cannot

move.

Verify there is adequate clearance between the lavatory, faucet,

and backsplash.

Trace the inside edge of the template on the countertop with a

pencil.

Mark the exact centers of the four drilling holes.

For K-2333-1 only: Mark the faucet supply hole location.

Drill 5/16″ holes at the four marked hole centers.

Cut out the sink hole along the inside of the marked cut-out line.

For K-2333-1 only: Cut or drill the faucet supply hole.

Backsplash

Mark the center of

each of the four

drilling holes.

Cut at inside

line.

Drill a 5/16" hole at

each marked spot.

Cut-out

Line

Mark the faucet

supply hole.

K-2333-1 only:

12"

(30.5 cm)

Min

Kohler Co. 3 1096633-2-A

1 2 3 4 5 6 7 8 ... 19 20

No comments

Kohler K-2393-WH Installation Guide Page 3