Kohler K-2393-WH Installation Guide download pdf (Page 5)

3. Install the Lavatory

CAUTION: Risk of personal injury or product damage. This

lavatory is very heavy. Two people should lift the lavatory

into place.

CAUTION: Risk of product damage. When lifting the

lavatory into place, do not bump the studs. Do not rest the

lavatory on the studs at any time.

CAUTION: Risk of product damage. Do not tighten the nuts

more than 1/2 turn past hand tight. Overtightening may

damage the lavatory.

Apply a continuous bead of silicone sealant on the countertop

1/8″ (3 mm) from the outside edge of the stud holes.

Lower the lavatory onto the countertop, guiding each stud

through the four holes.

Press the lavatory down ﬁrmly.

From underneath the countertop, thread a washer and nut onto

each of the studs. Tighten the nuts 1/2 turn past hand tight. Do

not overtighten.

Wipe away any excess sealant.

Install the drain to the lavatory according to the drain

manufacturer’s instructions.

Complete the faucet installation.

Connect the trap to the drain.

Run water into the lavatory. Check all connections for leaks.

Stud

Washer

Nut

Countertop

Lavatory

Apply a bead of silicone

sealant 1/8" (3 mm) to the

outside of the stud holes.

Kohler Co. 5 1096633-2-A

1 2 3 4 5 6 7 8 9 10 ... 19 20

No comments

Kohler K-2393-WH Installation Guide Page 5