Kohler Command CV730 User Manual download pdf (Page 160)

9.4

Section 9

Disassembly

Figure 9-11. Air Cleaner Bracket/Valve Cover

Mounting Screws (Two-Barrel Model Pictured).

Heavy Duty Air Cleaner

1. Disconnect the breather hose from the fitting in

adapter or elbow. Remove the hex flange nuts

securing the adapter and any attached clips to the

mounting studs. See Figure 9-10.

Figure 9-13. Removing Heavy Duty Air Cleaner

Assembly (Two-Barrel Model Pictured).

Remove Control Panel (If So Equipped)

1. Disconnect the Oil Sentry™ Indicator Light wires.

2. Disconnect the choke control cable from the

throttle control bracket.

3. Disconnect the throttle control bracket from the

cylinder head. See Figure 9-14.

4. Remove the panel from the blower housing. See

Figure 9-15.

4. Remove the two upper screws securing the air

cleaner mounting bracket to the blower housing

and remove the air cleaner assembly. See Figures

9-12 and 9-13.

Figure 9-10. Removing Breather Hose, Hex Nuts

and Adapter Elbow (Two-Barrel Model Pictured).

2. Pull the adapter elbow and gasket off the

mounting studs.

3. Remove the four screws (inner two valve cover

screws on each side) securing the air cleaner main

support bracket. Do not lose any of the mounting

hardware.

Two-Barrel Carburetor Models only: Unhook the

choke return spring from the bottom of the air

cleaner mounting bracket. See Figure 9-11.

Hex

Nuts

Adapter Elbow

Breather

Hose

Choke Return Spring

Figure 9-12. Removing Upper Mounting Screws.

Upper Mounting Screws

Main Bracket Mounting Screws

1 2 ... 155 156 157 158 159 160 161 162 163 164 165 ... 216 217

Comments to this Manuals

No comments

Kohler Command CV730 User Manual Page 160

Comments to this Manuals

Related products and manuals for For the car Kohler Command CV730