Kohler Electric Shower User Manual download pdf (Page 18)

18

12. Secure the shower to the wall

loosely through the top two fixing

holes, using the supplied screws.

13. Mark the position of the bottom

fixing hole.

14. Remove the shower from the wall.

Drill the bottom fixing hole and insert

the supplied wall plug.

15. Thoroughly flush the mains-fed

cold water supply pipe. The

supply must be clean and free

from debris BEFORE connecting

the appliance.

16. Replace the shower on the wall and

secure through the three fixing holes,

using the supplied screws.

Screws

17. Connect the inlet supply pipe to the

inlet connector using a 1/2” BSP

nipple with compression nuts and

olives (shown) or a push-fit

connector.

Inlet Connector

Compression

Nut

Olive

1/2” BSP Nipple

Olive

Compression

Nut

Inlet Supply Pipe

1 2 ... 13 14 15 16 17 18 19 20 21 22 23 ... 43 44

Comments to this Manuals

No comments