Kohler K-682-K-NA Installation Guide download pdf (Page 4)

Roughing-In

Before You Begin

CAUTION: Risk of product damage. The power supply and valve are rated to operate in temperatures

up to 104°F (40°C). Do not install the power supply or valve under a whirlpool surround or any

location where the temperature may reach temperatures over 104°F (40°C).

CAUTION: Risk of product damage. This valve contains plastic and rubber components; do not apply

excessive heat near the valve or apply ﬂux or acids directly onto the valve.

CAUTION: Risk of product damage. Do not apply petroleum-based lubricants to the valve

components.

CAUTION: Risk of product damage. Inlet and outlet threaded connections should be made using

sealant tape or liquid sealant. Do not use oil-based, non-setting compounds, such as plumbers putty, on

the threaded connections.

CAUTION: Risk of solenoid failure. No outlet should not ﬂow more than 10 gal/min.

Observe all local plumbing, building, and electrical codes.

Provide access for servicing.

Read these instructions and determine all required components along with their installation

locations before beginning this installation.

For optimum performance, 3/4″ dedicated water supply lines are recommended.

A minimum 2″ (5.1 cm) drain or a drain system capable of handling a water ﬂow of 20 gpm (76

lpm) is recommended for this installation.

20-1/8" (51.1 cm)

21-5/16" (54.1 cm)

5-15/16" (15 cm)

13' 1/8" (396.6 cm)30-7/8" (78.4 cm)

22-1/4" (56.5 cm)

1/2" NPT Outlets (6)

3/4" NPT Inlets

Cold

Hot

7-3/8"

(18.7 cm)

9-3/16"

(23.3 cm)

(7.6 cm)

2-1/8"

(5.4 cm)

3-5/16"

(8.4 cm)

1-3/4" (4.4 cm)

3-1/16" (7.8 cm)

2-3/16" (5.6 cm)

3-3/16"

(8 cm)

(5.1 cm)

1-5/16" (3.3 cm)

1043183-2-B 4 Kohler Co.

1 2 3 4 5 6 7 8 9 ... 63 64

Comments to this Manuals

No comments

Kohler K-682-K-NA Installation Guide Page 4

Comments to this Manuals

Related products and manuals for Storage chests & cabinets & trunks Kohler K-682-K-NA