Kohler 4737-0 Installation Guide download pdf (Page 3)

1. Prepare Electrical Connections

WARNING: Risk of electric shock, ﬁre, or personal injury.

This product must be grounded and connected only to a

dedicated, nominal 120 VAC, 60 Hz circuit protected by a

minimum 15 A Ground-Fault Circuit-Interrupter (GFCI) or

Residual Current Device (RCD). If the product is not

grounded or a higher voltage circuit is used, electric shock,

ﬁre, or personal injury may occur.

NOTICE: This product is factory equipped with a speciﬁc electrical

cord and plug to permit connection to a proper electric circuit. Make

sure that the product is connected to an outlet having the same

conﬁguration as the plug. Do not use an adapter with this product.

Do not modify the plug provided – if it will not ﬁt the outlet, have

the proper outlet installed by a qualiﬁed electrician. If the product

must be reconnected for use on a different type of electric circuit, the

reconnection should be made by qualiﬁed service personnel.

NOTICE: Do not use an extension cord with this product.

NOTICE: Consult your local electrical codes before determining the

connection type and the electrical outlet location. The temporary

connection may not be permitted by local electrical codes and the

electrical outlet location may be speciﬁed.

NOTICE: Do not plug in the seat until instructed to do so. This will

avoid possible product malfunction.

Cover Screw

Adapter

Temporary ConnectionPreferred Connection

Grounding

Screw Tab

12"

(30.5 cm)

Grounding Pin

Kohler Co. 3 1097712-2-A

1 2 3 4 5 6 7 8 ... 27 28

No comments

Kohler 4737-0 Installation Guide Page 3