Kohler K-14774-4-BN Installation Guide download pdf (Page 6)

2. Install the Faucet

Insert the O-ring into the groove on the underside of the collar.

From underneath the deck/rim: Thread the nut all the way down the valve. Insert

the diverter into the mounting hole.

From above the deck/rim: With the smaller end of the collar facing down, thread

the collar onto the valve until it stops.

From below the deck/rim: Tighten the nut until the valve is secure.

Using a needle-nose pliers, lift and hold the stem on the diverter. Thread the lift

rod into the stem.

Push the diverter tube down over the lift rod until it bottoms out in the diverter.

NOTE: Do not bend the lift rod during the spout installation.

Make sure the setscrew does not protrude past the inside wall of the spout. Back

it out if needed.

Align the spout with the lift rod.

Slide the spout down and align, then tighten the setscrew. Install the plug button.

NOTE: Do not overtighten the setscrews in the lift knob.

Set the lift knob on the lift rod.

Adjust the lift knob level with top of the spout. Turn the adjustment screw to level

it.

Tighten the top setscrew in the knob. Do not overtighten.

Lift the knob, insert the bottom setscrew, and tighten. Do not overtighten.

Plug Button

Bouchon

Tapón botón

Setscrew

Vis de retenue

Tornillo de fijación

Collar/Collier/Collarín

Washer/Rondelle/Arandela

Nut/Écrou/Tuerca

Diverter/Inverseur/Desviador

Lift Rod/Tige de levage/Tirador

Lift Knob

Bouton de levage

Perilla del tirador

Stem/Tige/Espiga

Setscrews

Vis de retenue

Tornillos de fijación

Diverter Tube

Tube du inverseur

Tubo de desviador

O-Ring

Joint torique

Arosello

Adjustment Screw

Vis de réglage

Tornillo de ajuste

1110056-2-C 6 Kohler Co.

1 2 3 4 5 6 7 8 9 10 11 ... 19 20

Comments to this Manuals

No comments

Kohler K-14774-4-BN Installation Guide Page 6

Comments to this Manuals

Related products and manuals for Unknown Kohler K-14774-4-BN