Kohler K-2200-0 Installation Guide download pdf (Page 4)

1. Preparation

Install the water supplies and drain piping according to the

roughing-in information.

NOTE: The lavatory displayed in the illustration may differ from

your actual product.

Wall-Mount Bracket Installations

NOTE: The K-2191 and K-2200 lavatories can be installed on this

wall-mount bracket. The K-2203 is not suitable for wall-mount

bracket installation.

Install the lavatory according to the instructions packed with the

bracket.

Countertop Installations

Position the template on the countertop.

For Wall-Mount Faucets: Provide sufficient spout overhang into

the lavatory basin. The faucet spout length must be at least 5″

(12.7 cm) to provide proper performance.

For Countertop Faucets: Pay special attention to the spout and

handle ﬁt clearance when locating the faucet. Use the template to

locate the faucet spout hole centerline on the countertop. This

centerline is recommended to provide adequate clearance

between the edge of the lavatory and the spout.

Spout

Centerline

Backsplash

Cut-out Line

1" (2.5 cm)

Minimum

Clearance

Outside

Edge of

Lavatory

1018373-2-B 4 Kohler Co.

1 2 3 4 5 6 7 8 9 ... 19 20

No comments

Kohler K-2200-0 Installation Guide Page 4