Kohler K-892-NY Installation Guide download pdf (Page 7)

7. Complete the Installation – Under-mount Only

CAUTION: Risk of property damage. Do not use adhesive sealant to secure the counter material

to the bath. Adhesive sealant will permanently bond the counter material to the bath making

separation difficult and costly. Instead, use silicone sealant or caulk which will ease future

maintenance or removal of the counter material.

Clean the rim of the bath.

NOTICE: The bead of silicone sealant or caulk must be placed a minimum of 2″ (51 mm) away from the

inside well edge of the rim.

Apply a continuous bead of silicone sealant or caulk to all areas where the rim and counter material

meet.

Align and properly position the counter material over the bath.

Press the counter ﬁrmly onto the bath.

Temporarily set weights on the counter material. This will hold the counter material in place while

the silicone sealant dries.

Apply a continuous bead of clear silicone sealant where the rim and the counter material meet.

Install the faucet trim according to the manufacturer’s instructions.

Apply silicone

sealant.

Apply silicone sealant

or caulk.

Counter Material

Weights

Inside Well Edge

Kohler Co. 7 1207305-2-A

1 2 3 4 5 6 7 8 9 10 11 12 ... 27 28

No comments

Kohler K-892-NY Installation Guide Page 7