Kohler K-9698-96 Installation Guide download pdf (Page 4)

2. Install the FlexJet Assembly

NOTE: The FlexJet O-ring must be correctly positioned, must be

lubricated, and must be in good condition to permit easy rotation

and proper orientation of the jet.

Lubricate the O-ring with silicone lubricant (supplied) to prevent

noisy operation of the jet. Install the O-ring onto the ﬁrst

shoulder of the FlexJet.

Carefully insert the jet into the housing, and lightly push and

rotate the jet until it snaps into position. Do not force the jet.

NOTE: When installed correctly, the jet should turn smoothly in

both directions.

FlexJet Housing

First Shoulder

Apply silicone

lubricant to o-ring.

FlexJet

1025430-2-B 4 Kohler Co.

1 2 3 4 5 6 7 8 9 ... 15 16

No comments

Kohler K-9698-96 Installation Guide Page 4