Kohler Command CV730 User Manual download pdf (Page 115)

7.3

Section 7

Retractable Starter

Figure 7-6. Removing Pulley from Housing.

8. Note the position of the spring and keeper

assembly in the pulley. See Figure 7-7.

Remove the spring and keeper assembly from the

pulley as a package.

WARNING: Spring Under Tension!

Do not remove the spring from the keeper. Severe personal

injury could result from the sudden uncoiling of the spring.

Center Screw

and Washer

Pawl Retainer

Housing

Pulley

Figure 7-4. Center Screw, Washer and Pawl

Retainer.

Figure 7-5. Brake Spring and Washer, Pawls, and

Pawl Springs.

5. Rotate the pulley clockwise 2 full turns. This will

ensure the spring is disengaged from the starter

housing.

6. Hold the pulley into the starter housing. Invert

the pulley/housing so the pulley is away from

your face and away from others in the area.

7. Rotate the pulley slightly from side to side and

carefully separate the pulley from the housing.

See Figure 7-6.

If the pulley and the housing do not separate

easily, the spring could be engaged in the starter

housing, or there is still tension on the spring.

Return the pulley to the housing and repeat step

5 before separating the pulley and housing.

Brake Spring and

Brake Washer

Pawls

Pawl Spring

Figure 7-7. Position of Spring and Keeper in

Pulley.

Inspection and Service

1. Carefully inspect the rope, pawls, housing, center

screw, and other components for wear or

damage.

2. Replace all worn or damaged components. Use

only genuine Kohler replacement parts as

specified in the Parts Manual. All components

shown in Figure 7-1 are available as service

parts. Do not use nonstandard parts.

Rope Hole

in Pulley

Outer Spring Hook

Spring &

Keeper

1 2 ... 110 111 112 113 114 115 116 117 118 119 120 ... 216 217

Comments to this Manuals

No comments

Kohler Command CV730 User Manual Page 115

Comments to this Manuals

Related products and manuals for For the car Kohler Command CV730