Kohler Command CV730 User Manual download pdf (Page 12)

1.10

Section 1

Safety and General Information

General Specifications

cont.

Oil Capacity (w/filter) - approximate,

determined by oil filter and oil cooler used:........................................................ 1.6-1.8 L (1.7-1.9 U.S. qt.)

Angle of Operation - Maximum (At Full Oil Level) All Directions .................. 25°

Blower Housing and Sheet Metal

M5 Fasteners Torque ................................................................................................ 6.2 N·m (55 in. lb.) into new holes

4.0 N·m (35 in. lb.) into used holes

M6 Fasteners Torque ................................................................................................ 10.7 N·m (95 in. lb.) into new holes

7.3 N·m (65 in. lb.) into used holes

Rectifier-Regulator Fastener Torque ..................................................................... 1.4 N·m (12.6 in. lb.)

Camshaft

End Play (With Shim) .............................................................................................. 0.076/0.127 mm (0.0030/0.0050 in.)

Running Clearance ................................................................................................... 0.025/0.063 mm (0.0010/0.0025 in.)

Bore I.D.

New ..................................................................................................................... 20.000/20.025 mm (0.7874/0.7884 in.)

Max. Wear Limit ................................................................................................ 20.038 mm (0.7889 in.)

Camshaft Bearing Surface O.D.

New ..................................................................................................................... 19.962/19.975 mm (0.7859/0.7864 in.)

Max. Wear Limit ................................................................................................ 19.959 mm (0.7858 in.)

Carburetor and Intake Manifold

Intake Manifold Mounting Fastener Torque

Torque in Two Stages ........................................................................................ first to 7.4 N·m (66 in. lb.)

finally to 9.9 N·m (88 in. lb.)

Carburetor Mounting Nut Torque ......................................................................... 6.2-7.3 N·m (55-65 in. lb.)

Connecting Rod

Cap Fastener Torque (torque in increments)

8 mm straight shank ......................................................................................... 22.7 N·m (200 in. lb.)

8 mm step-down ............................................................................................... 14.7 N·m (130 in. lb.)

6 mm straight shank ......................................................................................... 11.3 N·m (100 in. lb.)

Connecting Rod-to-Crankpin Running Clearance

New ..................................................................................................................... 0.030/0.055 mm (0.0012/0.0022 in.)

Max. Wear Limit ................................................................................................ 0.070 mm (0.0028 in.)

Connecting Rod-to-Crankpin Side Clearance ...................................................... 0.26/0.63 mm (0.0102/0.0248 in.)

Connecting Rod-to-Piston Pin Running Clearance............................................. 0.015/0.028 mm (0.0006/0.0011 in.)

Piston Pin End I.D.

New ..................................................................................................................... 17.015/17.023 mm (0.6699/0.6702 in.)

Max. Wear Limit ................................................................................................ 17.036 mm (0.6707 in.)

Values are in Metric units. Values in parentheses are English equivalents. Lubricate threads with engine oil

prior to assembly.

1 2 ... 7 8 9 10 11 12 13 14 15 16 17 ... 216 217

Comments to this Manuals

No comments

Kohler Command CV730 User Manual Page 12

Comments to this Manuals

Related products and manuals for For the car Kohler Command CV730