Kohler Command CV730 User Manual download pdf (Page 158)

9.2

Section 9

Disassembly

Figure 9-2. Removing Oil Fill Cap/Dipstick.

3. Remove the mounting screw and detach the oil

fill tube. See Figure 9-3.

4. Remove and discard the oil filter. See Figure 9-4.

Remove Oil Cooler

If equipped, the oil cooler can now be removed from

the engine. Two different styles are used, see Figures

6-6 and 6-7 in Section 6.

1. Use a 5/16" allen wrench to remove the oil filter

nipple.

2. For the crankcase-mounted cooler: Separate the

oil cooler from the oil pan. Remove and discard

the gasket located between them.

For the blower housing-mounted cooler:

Separate the filter adapter from the oil pan,

leaving the oil lines attached. Remove the two hex

flange screws mounting the oil cooler to the

blower housing. Remove the cooler, lines, and

filter adapter as an assembly.

Remove Muffler

1. Remove the exhaust system and attaching

hardware from the engine. On engines equipped

with a port liner, remove it now.

Remove Air Cleaner Assembly

Standard Air Cleaner

1. Unhook the latches located on either side of the

air cleaner cover, or loosen the cover-retaining

knob, and remove the cover. See Figure 9-5.

Figure 9-3. Removing Oil Fill Tube Bracket.

Figure 9-4. Removing Oil Filter.

2. Allow ample time for the oil to drain from the

crankcase and oil filter.

Figure 9-5. Removing Standard Air Cleaner Cover.

2. Remove the wing nut from the element cover.

1 2 ... 153 154 155 156 157 158 159 160 161 162 163 ... 216 217

No comments

Kohler Command CV730 User Manual Page 158