Kohler K-118-4-BN Installation Guide download pdf (Page 4)

2. Install the Handle Valve

Slide a gasket onto each valve body until it is snug against the

underside of the escutcheon.

NOTE: The valve body marked ″COLD″ with a blue tape must be

installed into the mounting hole on the right as viewed from the

front of the sink.

From the top of the sink, insert the valve bodies into the

mounting holes.

From the underside of the sink, slide a washer and a nut onto

each valve body.

Rotate each valve body until the copper tubing faces towards the

outside of the sink.

Firmly hold the valve bodies in place and securely tighten the

nuts with a wrench. Do not overtighten.

Escutcheon

Valve

Body

Gasket

Washer

Nut

113744-2-BB 4 Kohler Co.

1 2 3 4 5 6 7 8 9 ... 19 20

No comments

Kohler K-118-4-BN Installation Guide Page 4