Kohler K-T7751-4-CP Installation Guide download pdf (Page 5)

3. Install the Spout

NOTICE: To avoid damage to the seal in the base of the spout, use

care when installing the spout.

NOTICE: To avoid damage to the O-ring on the spout sleeve

assembly, keep the spout supply tube clean and use care when

installing the spout.

Loosen the setscrew until it is clear of the inside wall of the

spout.

Apply a ring of plumbers putty or other sealant around the

underside of the spout according to the sealant manufacturer’s

instructions.

Position the spout on the spout sleeve assembly, then carefully

press down until the spout contacts the ﬁnished surface.

Rotate the spout until it is aligned to face straight forward.

Retighten the setscrew.

Insert the plug button over the setscrew so it is ﬂush with the

surface of the spout.

Remove any excess putty or sealant.

Setscrew

O-Ring

Spout Supply

Tube

Plug Button

Spout

Sleeve

Assembly

Kohler Co. 5 1011303-2-C

1 2 3 4 5 6 7 8 9 10 ... 23 24

No comments

Kohler K-T7751-4-CP Installation Guide Page 5