Kohler K-T7751-4-CP Installation Guide download pdf (Page 6)

4. Install the Handles

NOTE: The handle assembly shown may differ from your actual

product. The installation instructions still apply.

Insert a washer into the underside of each escutcheon.

Thread each escutcheon over each valve stem until it is snug

against the ﬁnished surface.

Slide a spline adapter half way down each valve stem.

Gently press the handle assembly marked ″cold″ with blue tape

onto the spline adapter on the right.

Gently press the remaining handle assembly onto the spline

adapter on the left.

Check for proper alignment of each handle assembly. If necessary,

remove the handle assembly, reposition the spline adapter on the

valve stem, then reinstall the handle assembly.

For vandal-resistant handle assemblies: Insert each

vandal-resistant button into the top of each handle assembly.

Right is blue; left is red.

Secure the handle assemblies with a screw.

For regular handle assemblies: Press the plug button over the

screw.

Plug

Button

Vandal-Resistant

Screw

Handle

Assembly

Spline

Adapter

Valve Stem

Escutcheon

Vandal-

Resistant

Button

(Red/Blue)

Washer

1011303-2-C 6 Kohler Co.

1 2 3 4 5 6 7 8 9 10 11 ... 23 24

No comments

Kohler K-T7751-4-CP Installation Guide Page 6