Kohler 9948-47 Installation Guide download pdf (Page 3)

Roughing-In

NOTICE: All dimensions are nominal. The stud opening tolerance is +1/4″ (6 mm) and -0 (0 mm).

Carefully measure your ﬁxture before determining enclosure size. When a ﬁre-rated wall is speciﬁed,

dimensions are to the inside of the wall board. Some shimming between the stud frame and the ﬁxture

may be required. Dimensions given in the roughing-in information are crucial for proper installation.

Construct the framing and plumbing accurately.

NOTE: If a ﬁrewall is required, increase the roughing-in dimensions according to the thickness of the

ﬁrewall material. Stud opening dimensions must be measured toward the exposed side of the wall

material.

NOTE: If the unit will be installed against a masonry wall, make provisions for plumbing connections.

Construct a separate frame wall a minimum of 6″ (15.2 cm) from the masonry wall.

1-1/4"

(3.2 cm)

K-9948

K-9949

Flange Detail

60" (152.4 cm)

55-1/8" (140 cm)

32"

(81.3 cm)

16-13/16"

(42.7 cm)

3-9/16"

(9 cm)

3-3/8" (8.6 cm)

1-11/16" (4.3 cm)

4-3/4"

(12.1 cm)

9/16" (1.4 cm)

Kohler Co. 3 1092413-2-A

1 2 3 4 5 6 7 8 ... 23 24

No comments

Kohler 9948-47 Installation Guide Page 3