Kohler 9948-47 Installation Guide download pdf (Page 4)

1. Install the Plumbing

NOTE: Follow all local codes, standards, and regulations.

Locate rough plumbing for the drain according to the correct model’s roughing-in dimensions. Refer

to the roughing-in provided with this guide.

NOTE: If the plumbing will be located on an unﬁnished stud wall, install the supplies after the receptor is

installed.

Position the plumbing according to the roughing-in information.

Cap the supplies and check for leaks.

Install a 2″ (5.1 cm) drain pipe cut to extend 3/4″ (1.9 cm) to 1″ (2.5 cm) below the subﬂoor or slab.

A pocket is required in a slab construction to accommodate the drain ﬁtting.

Provide access to make drain connections to the receptor.

2-1/2" (6.4 cm)

Min

3/4" (1.9 cm) to

1" (2.5 cm)

Below Subfloor

2" (5.1 cm)

Drain Pipe

3/4" (1.9 cm) to

1" (2.5 cm)

Below Slab

2" (5.1 cm)

Drain Pipe

Receptor

6" (15.2 cm)

Wood Subfloor

Front

Receptor

Concrete Subfloor

32" (81.3 cm)

K-9948

K-9949

Drain Cutout

Front View

Wood Subfloor

Front View

Concrete Subfloor

6" (15.2 cm)

1092413-2-A 4 Kohler Co.

1 2 3 4 5 6 7 8 9 ... 23 24

No comments

Kohler 9948-47 Installation Guide Page 4