Kohler K-1663-CP Installation Guide download pdf (Page 7)

4. Operating the Steam Control

Steam Control Operation

NOTE: The clock is always displayed in the LED window when the steam is not in use.

NOTE: The next time the unit is turned on, the steam duration and temperature settings will be based

upon the previous user settings. The default setting for a new control unit is 113°F (45°C) for 20 minutes.

To start the unit: Press the ON/OFF button to start the steam. The green LED light on the button

will illuminate. ″On″ will be displayed in the LED window until the temperature reaches 90°F

(32°C). The current temperature is displayed until the target temperature is reached.

To stop the unit: Push the ON/OFF button again to stop the steam. The green LED light on the

button turns off and the LED window displays ″Off″ for 5 seconds, then returns to the time of day.

Steam Control Adjustments

Make sure the steam control unit is turned ON before making any of the following adjustments.

Press the ON button to activate the steam control unit.

To adjust the steam temperature: Push the TEMP button. The LED window ﬂashes the temperature

from the previous user. Press the up arrow to increase the temperature and the down arrow to

decrease the temperature. After 5 seconds, the ﬂashing will stop and the current temperature will be

displayed as it changes to the target temperature.

To change the temperature scale: To toggle the temperature reading between Fahrenheit and

Celsius, push and hold the TEMP button for 3 seconds.

To set the timer: Push the TIMER button. The LED window ﬂashes the previous setting. Press the

up or down arrows to adjust the setting. After 5 seconds, the ﬂashing stops and the timer setting is

displayed.

To adjust the clock: Push the CLOCK button. The LED window ﬂashes the current time of day

setting. Press the up or down arrows to adjust the clock. After 5 seconds, the ﬂashing stops and the

set time is displayed.

5. Troubleshooting Guide

The troubleshooting guide is for general aid only. For service and installation issues and concerns, call

1-800-585–STEAM (7832).

Symptoms Probable Causes Recommended Action

1. ″Err 1″ appears on the

control pad.

A. The power button is stuck. A. Reset the power at the breaker.

2. ″Err 2″ appears on the

control pad.

A. ″Up button″ is stuck. A. Reset the power at the breaker.

Increase

Timer

Decrease

On/Off

Temperature

Clock

Window

Kohler Co. 7 1008020-2-D

1 2 3 4 5 6 7 8 9 10 11 12 ... 23 24

Comments to this Manuals

No comments

Kohler K-1663-CP Installation Guide Page 7

Comments to this Manuals

Related products and manuals for Unknown Kohler K-1663-CP