Kohler K-45903-2BZ Installation Guide download pdf (Page 2)

Tools and Materials

Before You Begin

NOTE: This guide includes the installation sequence for the shower

column only. Install the mixing valve, mixing valve trim, and spout

according to the manufacturer’s instructions.

NOTICE: Risk of product damage. Do not apply excessive weight

or downward force to the shower column.

CAUTION: Risk of property damage. Water leakage may

occur if supply piping allows movement. Ensure the supply

piping and 1/2″-14 NPT elbow ﬁtting are securely fastened to

braces in the stud framing.

NOTE: The showerhead and handshower are purchased separately.

Please read all instructions before you begin.

Observe all local plumbing and building codes.

Shut off the water supply.

Inspect the existing supply piping and wall materials. Replace if

necessary.

The shower column is supplied with toggle anchor fasteners for

installation onto a ﬁnished wall surface. The ﬁnished wall

thickness must be a minimum of 5/8″ (16 mm) and must be

adequate in strength. Two toggle anchor fasteners are required

per mounting collar.

Sealant Tape

3/8"

100% Silicone Sealant

1/2"

Phillips

Screwdriver

1188076-2-A 2 Kohler Co.

1 2 3 4 5 6 7 ... 55 56

No comments

Kohler K-45903-2BZ Installation Guide Page 2