Kohler K-702202-L-MX Installation Guide download pdf (Page 19)

8. Install the Hanging Brackets — Outside Panel

CAUTION: Risk of injury or product damage. Unframed tempered glass should

not contact hard surfaces or it may shatter. Do not touch the edge of the tempered

glass panel with tools or any hard objects. Do not set unframed tempered glass

directly on the ﬂoor.

Insert a bushing into one of the holes at the top of the outside glass panel.

Install a hanging bracket over the glass panel, aligning the hole in the bracket

with the bushing.

Insert a blind nut into the hanging bracket hole and bushing. Secure with a #8-32

x 1/4″ machine screw.

Repeat the steps to install the other bracket on the outside panel.

IMPORTANT! The steel side of the roller must be installed against the hanging

brackets.

Install the rollers on the same side as the bottom frame leg.

Assemble the rollers and #8-32 x 3/8″ machine screws to the hanging brackets

through the center hole of the bracket.

Secure the rollers.

Bushing/Manchon/Buje

Hanging Bracket

Support d' accrochage

Soporte de suspensión

8-32 x 3/8" Machine Screw

Vis mécanique 8-32 x 3/8"

Tornillo para metal 8-32 x 3/8"

Rollers on same side as bottom frame leg.

Placer les rouleaux du même côté du pied de cadre inférieur.

Las ruedas deben estar en el mismo lado que la pata del

marco inferior.

Install outside panel roller.

Installer le rouleau du

panneau extérieur.

Instale la rueda del panel

exterior.

Roller/Rouleau/Rueda

Blind Nut

Écrou borgne

Tuerca ciega

8-32 x 1/4" Bolt

Boulon 8-32 x 1/4"

Perno 8-32 x 1/4"

Kohler Co. 19 1063221-2-B

1 2 ... 14 15 16 17 18 19 20 21 22 23 24 ... 43 44

No comments

Kohler K-702202-L-MX Installation Guide Page 19