Kohler K-702412-L-MX Installation Guide download pdf (Page 14)

10. Install the Wall Jamb Covers

Install the wall jamb covers to the top of the wall jambs. Flat edges should be toward the wall.

11. Install the Handles

CAUTION: Risk of product damage. If the handles are tightened to the tempered glass without the

spacers the glass will shatter. When reassembling the door handle assembly, it is critical the

provided spacers be re-installed. Without the spacers there will be metal-on-glass contact.

The handle comes pre-assembled and must be disassembled prior to installation on the shower door.

Unscrew handle with no logo from the pre-assembled handle assembly.

Remove the spacer from the handle setscrew.

Slide the assembled handle setscrew and handle assembly (logo facing the outside of the shower)

through the hole in the glass shower door.

Reinstall the spacer on the handle setscrew.

Screw the other non-logo handle onto the handle setscrew.

Fully tighten both handles evenly making sure the logo is properly orientated.

Bottom View

Wall Jamb Cover

Wall Jamb

Inside Handle

Spacer

Handle

Setscrew

Outside

Handle

Logo

Spacer

Hole in glass

1036565-2-D 14 Kohler Co.

1 2 ... 9 10 11 12 13 14 15 16 17 18 19 ... 47 48

No comments

Kohler K-702412-L-MX Installation Guide Page 14