Kohler K-12183-BN Installation Guide download pdf (Page 4)

2. Install the Drain

If present, remove the protective plastic cap from the drain and

discard.

Remove the nut, washer, and gasket from the drain body.

Apply a bead of plumbers putty or other sealant around the

underside of the ﬂange according to the sealant manufacturer’s

instructions.

For drains with metal stoppers: Close the drain and rotate the

drain body until the logo is positioned horizontally.

Insert the drain into the drain hole and press into place.

Slide the gasket (tapered side up) onto the drain body.

Slide the washer over the threads on the drain body.

Thread the nut up the drain body until snug against the

underside of the lavatory. Use care not to rotate the drain while

tightening the nut.

Using a wrench, tighten the nut.

Remove any excess putty or sealant.

Connect the P-trap to the drain body.

Washer

Flange

Drain Body

Nut

Tapered Gasket

Thick Tapered Gasket

(for thin-walled vessel style

lavatory installations)

1011034-2-F 4 Kohler Co.

1 2 3 4 5 6 7 8 9 ... 19 20

No comments

Kohler K-12183-BN Installation Guide Page 4