Kohler K-18486-4-BN Installation Guide download pdf (Page 2)

Tools and Materials

Thank You For Choosing Kohler Company

We appreciate your commitment to Kohler quality. Please take a few

minutes to review this manual before you start installation. If you

encounter any installation or performance problems, please don’t

hesitate to contact us. Our phone numbers and website are listed on

the back cover. Thanks again for choosing Kohler Company.

Before You Begin

IMPORTANT! For freestanding installations: Discard the following

hardware provided with the K-18486 bath ﬁller: support plate (1),

threaded brass tubes (2), nuts (4), ﬁber washers (4), and screws (8).

IMPORTANT! For freestanding installations: Do not remove the

protective wrap from the riser tubes until instructed to do so.

This product may be installed as freestanding (installed onto riser

tubes) or deck-mount (installed onto the bath deck). Follow the

sections that pertain to your particular installation.

Please read all instructions before you begin.

Shut off the water supply.

Observe all local plumbing and building codes.

IMPORTANT! For proper drainage of the spout, install the bath

ﬁller to a level surface.

Before installation, unpack the new faucet trim and inspect it for

damage. Return it to the carton until installation.

Adjustable

Wrench

Strap

Wrench

Hacksaw or

Tubing Cutter

Propane

Torch

Plumbers

Putty

Assorted

Screwdrivers

Solder

1-1/2" Thin Wall

Socket Wrench

Hex

Wrenches

Drill and

Hole Saw

Thread

Sealant

Small

Level

Two 12" (30.5 cm)

Long, 1/2" Copper

Tubes

1054455-2-C 2 Kohler Co.

1 2 3 4 5 6 7 ... 51 52

Comments to this Manuals

No comments

Kohler K-18486-4-BN Installation Guide Page 2

Comments to this Manuals

Related products and manuals for Sanitary ware Kohler K-18486-4-BN