Kohler K-2974-K-NA Installation Guide download pdf (Page 4)

Complete the Installation

Flush the mixed water supply line to remove any debris.

Use thread sealant and connect the mixed water supply line to

the valve inlet port. The valve is marked with an arrow to

identify the required water ﬂow direction.

Connect the water outlet line to the valve.

Secure the water supply tubing to the support framing.

Secure the valve with screws as shown.

IMPORTANT! Finished wall surface should not extend beyond the

installed plaster guard.

Complete the ﬁnished wall.

Turn on the water supply to the volume control valve and check

for leaks.

Turn off the water.

Remove and discard the plaster guard.

Warranty

KOHLER

Faucet Lifetime Limited Warranty

Kohler Co. warrants its Faucets* manufactured after January 1, 1997, to

be leak and drip free during normal residential use for as long as the

original consumer purchaser owns his or her home. If the Faucet

should leak or drip during normal use, Kohler Co. will, free of charge,

Install with arrow pointing

in direction of water flow.

Mixed Water Supply Line

Direction of Water Flow

Water Outlet Line

Inlet

Screw (not provided)

1205547-2-A 4 Kohler Co.

1 2 3 4 5 6 7 8 9 ... 19 20

No comments

Kohler K-2974-K-NA Installation Guide Page 4