Kohler K-411-NA Installation Guide download pdf (Page 4)

2. Install the Spout Supply Tube

NOTE: Leave the protective sleeve on the spout supply tube until

the spout installation.

Slide the brass washer from the bottom of the spout supply tube

over the threads until it reaches the spout supply shoulder.

Insert the spout supply tube through the mounting hole from the

top of the deck/bath rim.

The ﬂat portion of the brass washer should face forward. The

spout supply tube will be suspended by the brass washer.

Slide the plate (oriented with the tabs toward the deck) and

washer onto the spout supply tube from the bottom and thread

on the nut.

Tighten the nut.

Secure the plate to the rough deck with two wood screws.

3. Attach the Tubing

NOTE: The tee supplied with the supply tube may not be needed,

depending on the valve.

Measure, cut, and insert the copper tubing between the supply

tube and the valves as needed.

Dry ﬁt the components to conﬁrm proper ﬁt.

Solder the copper tubes to the valve bodies, tee, and spout supply

tube.

Brass

Washer

Plate

Washer

Wood

Screw

Wood

Screw

Nut

Spout Supply Tube

Spout

Supply

Shoulder

Spout

Supply

Tube

Threaded

Collar

Tee

1010568-2-B 4 Kohler Co.

1 2 3 4 5 6 7 8 9 ... 19 20

No comments

Kohler K-411-NA Installation Guide Page 4