Kohler K-T196-CP Installation Guide download pdf (Page 3)

1. Install the Spout

IMPORTANT! Use care when installing the spout to avoid

scratching the ﬁnish.

Remove the spout thread protector and discard it.

Slide the bonnet onto the spout.

Loosen the spout setscrew, and thread the spout into the mixer

outlet port until it is snug.

Back off the spout until it faces straight down. Tighten the

setscrew.

Carefully slide the bonnet onto the spout, pushing ﬁrmly until it

contacts the spout shank ﬂange.

Apply plumbers putty or other sealant to the back surface of the

spout escutcheon according to the putty manufacturer’s

instructions.

Carefully slide the escutcheon over the spout and bonnet, and

press it ﬁrmly against the wall.

Remove any excess putty or sealant.

Setscrew

Spout

Shank

Mixer

Outlet

Port

Bonnet

Apply

plumbers

putty.

Escutcheon

Spout

Thread

Protector

Kohler Co. 3 1016743-2-B

1 2 3 4 5 6 7 8 ... 15 16

No comments

Kohler K-T196-CP Installation Guide Page 3