Kohler K-T314-4M-BN Installation Guide download pdf (Page 10)

1012557-2-A

Kohler Co., Kohler, WI U.S.A.

8. INSTALL HANDLES

Remove the plaster guards from the hot and cold valves.

Fig. #21

Install a stem extension onto each valve stem spline.

Ensure that the splines are properly aligned.

Fig. #22

Valve Stem Spline

Stem Extension

Valve Body

NOTE: There are several handle styles available for this

product. For illustrative purposes, only the Cross handle

is shown. Installation of the different handle styles is

identical.

Install the handle assembly by threading onto the valve

body. Take care that the splines inside the skirt and stem

extension are engaged. Adjust as required.

NOTE: The stem extension allows for fine adjustment of

handle alignment. To refine the alignment, unthread the

handle assembly, and reposition the stem extension on

the valve stem. Rethread the handle assembly, and check

the handle alignment. Repeat until the alignment is

satisfactory.

Fig. #23

Handle

Assembly

Stem Extension

1 2 ... 5 6 7 8 9 10 11 12 13 14 15 ... 35 36

No comments

Kohler K-T314-4M-BN Installation Guide Page 10