Kohler K-6269-C11-BN Installation Guide download pdf (Page 9)

4. Install the Spout

Conﬁrm there are three setscrews pre-installed in the wall ﬂange and not

protruding into the inside diameter of the wall ﬂange. Adjust as necessary.

Apply plumbers putty or other suitable sealant to the back surface of the wall

ﬂange. Refer to the putty manufacturer’s application instructions.

Slide the wall ﬂange over the spout tool (not shown).

Position the three holes on the wall ﬂange at the 2, 6, and 10 o’clock positions,

then secure the wall ﬂange with three wood screws.

Remove the spout tool.

Temporarily place the escutcheon on the wall ﬂange.

Thread the spout onto the mixer valve until the spout is fully seated and vertically

level. If necessary, unthread the spout for adjustment.

Slide the escutcheon away from the ﬁnished wall so that the setscrew holes of the

wall ﬂange can be accessed.

Thread three wood screws (not provided) into the wall ﬂange until the setscrews

contact the spout. Fully tighten the wood screws.

Slide the escutcheon back against the ﬁnished wall and onto the wall ﬂange.

With the setscrew hole at the 6 o’clock position, secure the escutcheon with a

setscrew.

Setscrew

Vis de retenue

Tornillo de fijación

Escutcheon/Applique/Chapetón

Setscrew/Vis de retenue/Tornillo de fijación

Spout

Bec

Surtidor

Wall Flange/Bride murale/Brida mural

Setscrew

Vis de retenue

Tornillo de fijación

Wood Screws/Vis à bois/Tornillos para madera

Level

Niveau à bulle

Nivel

Apply plumbers putty.

Appliquer du

mastic de plombier.

Aplique masilla

de plomería.

Kohler Co. 9 1141147-2-A

1 2 3 4 5 6 7 8 9 10 11 12 13 14 ... 19 20

No comments

Kohler K-6269-C11-BN Installation Guide Page 9