Kohler K-T16236-4-SN Installation Guide download pdf (Page 4)

2. Install the Spout

NOTICE: To avoid damage to the O-ring on the diverter body, keep

the diverter tube clean.

TIP: To easily install the lift rod, lift up and hold the stem with a

pair of pliers.

Fully insert the lift rod into the stem of the diverter body.

Install the diverter tube over the lift rod and into the diverter

body.

Loosen the setscrew on the spout assembly until it is clear of the

inside wall of the spout.

Apply a ring of plumbers putty or other sealant around the

underside of the spout base according to the sealant

manufacturer’s instructions.

Position the spout over the diverter tube, then carefully press

down until the spout contacts the ﬁnished deck.

Rotate the spout until it is aligned to face straight forward.

Retighten the setscrew.

Push the plug button into place over the setscrew.

Install the lift knob onto the lift rod.

Remove any excess plumbers putty or sealant.

Diverter Body

Diverter Tube

Spout Assembly

Setscrew

Plug Button

Lift Rod

Lift Knob

Finished Deck

1054811-2-B 4 Kohler Co.

1 2 3 4 5 6 7 8 9 ... 19 20

No comments

Kohler K-T16236-4-SN Installation Guide Page 4