Kohler K-1132-96 Installation Guide download pdf (Page 6)

1. Prepare the Site

Flooring

NOTICE: Adequate ﬂoor support must be provided. Consult the roughing-in

information packed with the bath for speciﬁc ﬂoor loading requirements.

Install adequate ﬂoor support.

NOTICE: To ensure a successful installation, it is critical that bath be installed on a

level subﬂoor.

Verify the subﬂoor is level. Adjust for level, if necessary.

Framing

CAUTION: Risk of property damage. Do not support the bath by the rim. The

bath must be supported by the leveling blocks only or bath base, depending upon

your bath model.

NOTICE: To ensure the bath does not rest on the rim, a 1/16″ (2 mm) gap must exist

between the framing and the underside of the rim. When constructing the framing,

take into account the gap and the thickness of the ﬁnished wall/deck material.

NOTICE: The bath is for drop-in or raised deck installations only. If a deck-mount

faucet will be installed, plan a space on the deck to accommodate the deck-mount

faucet.

Construct the framing according to the roughing-in information packed with the

bath. Ensure a 1/16″ (2 mm) gap will exist between the framing and the underside

of the rim.

Plumbing

NOTE: For through-the-ﬂoor drain installations: A drain hole will need to be cut to

accommodate the drain connections. For above-the-ﬂoor drain installations: A hole

will not need to be cut.

Position the plumbing according to the roughing-in sheet packed with the bath.

Cap the supplies and check for leaks.

Provide a 1/16" (2 mm) gap between the bath rim

and the framing.

Fournir un espace de 1/16" (2 mm) entre le rebord

de la baignoire et le cadrage.

Provea una separación de 1/16" (2 mm) entre el

borde de la bañera y la estructura de postes de

madera.

1084212-2-B 6 Kohler Co.

1 2 3 4 5 6 7 8 9 10 11 ... 23 24

No comments

Kohler K-1132-96 Installation Guide Page 6