Kohler K-1257-VBR-96 Installation Guide Page 2

  • Download
  • Add to my manuals
  • Print
  • Page
    / 60
  • Table of contents
  • TROUBLESHOOTING
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 1
IMPORTANT INSTRUCTIONS
WARNING: When using electrical products, basic precautions should always be followed,
including the following:
WARNING: Risk of electric shock. Connect only to a circuit protected by a Ground-Fault
Circuit-Interrupter (GFCI) or Residual Current Device (RCD). Grounding is required. The unit
should be installed and grounded by a qualified service representative.
WARNING: Risk of electric shock. A qualified electrician should route all electrical wiring.
WARNING: Risk of electric shock. Do not operate electrical powered auxiliary audio devices near
water.
WARNING: Risk of electric shock. Disconnect power before servicing.
WARNING: Risk of injury or property damage. Please read all instructions thoroughly before
beginning installation.
NOTICE: Follow all plumbing, electrical, and building codes.
NOTICE: It the supply cord is damaged, it must be replaced by the manufacturer, its service agent, or
similarly qualified agent in order to avoid a hazard.
Tools and Materials
Before You Begin
CAUTION: Risk of personal injury. Do not use auxiliary devices connected to an AC power
source while bathing.
CAUTION: Risk of property damage. Do not support the bath by the rim. The bath must be
supported by the support blocks only.
Observe all local plumbing, building, and electrical codes.
Read these instructions and determine all required components along with their installation
locations before beginning this installation.
This bath must be installed as a three side alcove installation.
• Conventional woodworking tools and materials
• 2x4s
• Conduit
• Drop cloth
• Mortar cement (Optional)
• Construction adhesive (Optional)
• Felt Strips
Plus:
#1 and #2
Tin Snips
100% Silicone Sealant
1188012-2-C 2 Kohler Co.
Page view 1
1 2 3 4 5 6 7 ... 59 60

Comments to this Manuals

No comments