Kohler K-1954-0 Installation Guide download pdf (Page 15)

8. Check Operation

Flush the toilet repeatedly using the module.

Observe the chain and ﬂapper or canister.

Does the ﬂapper/canister lift high enough to ﬂush? If not, adjust

the chain tighter as needed.

IMPORTANT! If the canister spins when ﬂushed, add 1-2 links of

slack to the chain.

Does the ﬂapper/canister fully close when the ﬂush cycle is

complete? If not, adjust the chain to add slack as needed.

Does the canister spin when being raised or lowered during the

ﬂush cycle? If yes, add slack to the chain.

If the handle is still attached, does the chain from the handle

interfere with the ﬂushing action when the touchless ﬂush is

activated? If yes, you may need to disconnect the handle.

Observe the movement of the wheel.

Does the wheel come in contact with anything when rotating?

Adjust the location as needed.

For installations with the handle in place, ﬂush the toilet using

the handle. Conﬁrm the handle chain and module chain do not

interfere with each other.

Turn the water supply back on. Allow the tank to ﬁll.

Conﬁrm operation with a full ﬂush.

Kohler Co. 15 1216369-2-D

1 2 ... 10 11 12 13 14 15 16 17 18 19 20 ... 63 64

No comments

Kohler K-1954-0 Installation Guide Page 15