Kohler K-896-47 Installation Guide Page 4

  • Download
  • Add to my manuals
  • Print
  • Page
    / 24
  • Table of contents
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 3
Before You Begin (cont.)
Kohler Co. reserves the right to make revisions in the design of products without
notice, as specified in the Price Book.
Undermount Bath Installations K-895
WARNING: Risk of eye injury. Always wear safety glasses when cutting the
counter material.
CAUTION: Risk of property damage. Braces must be installed to support the
weight of the counter from below. Do not rely on the bath alone to support this
weight. Refer to any instructions supplied with the counter for proper bracing
installation. If braces are not installed, the counter may flex and possibly damage
the bath.
CAUTION: Risk of property damage. Refer to the instructions supplied with the
counter for the proper cutting method. If the proper cutting method is not used,
damage to the counter can occur.
Use the undermount template (1106074-7) supplied with the bath. Follow the
instructions included in this guide as well as the instructions provided with the
counter for proper installation.
Consult with your local counter fabricator for instructions on cutting the counter
properly.
Drop-In Bath Installations K-896
NOTICE: The bath rim running the length of the bath is designed to be used as a
grip rail for the bather and a seat support for the optional wood seat (not provided).
To ensure the bath rim is used as designed, allow (1) a minimum of 2 (5.1 cm) of
clearance between the bath rim and the finished wall and (2)a1/16 (2 mm) gap
between the bath rim and the finished material.
Avant de commencer
Toutes les installations
AVERTISSEMENT: Risque de blessures corporelles. Porter un équipement de
protection et obtenir suffisamment d’aide pour soulever ou déplacer la baignoire.
Les baignoires en fonte sont très lourdes. Si la baignoire en fonte n’est pas
soulevée proprement, des blessures peuvent être occasionnées.
ATTENTION: Risque d’endommagement du matériel. Lors de la planification du
cadrage, prendre en considération la hauteur de la baignoire avec les pieds. Afin
d’éviter tout endommagement, la baignoire doit être supportée par les pieds
uniquement. Ne pas soulever la baignoire par le cadrage ou le rebord.
NOTICE: Il est important que la baignoire soit installée sur un plancher à niveau et
supportera une charge de 61 lbs/pieds carrés (296 kg/mètre carré).
Respecter tous les codes de plomberie et de bâtiment locaux.
Avant de déplacer la baignoire, planifier avec attention l’emplacement
d’installation. Cette baignoire est lourde et ne passe pas facilement entre les
montants des portes.
Assurer un bon accès aux connexions finales de plomberie.
Cette baignoire est conforme à la norme Standard ASME A112.19.1. Toutes les
dimensions sont nominales.
1105828-2-A 4 Kohler Co.
Page view 3
1 2 3 4 5 6 7 8 9 ... 23 24

Comments to this Manuals

No comments