Kohler COMMAND CH18-745 User Manual download pdf (Page 116)

7.5

Section 7

Retractable Starter

4. Place the brake washer in the recess in starter

pulley; over the center shaft.

5. Lubricate the brake spring sparingly with grease.

Place the spring on the plain washer. Make sure

the threads in the center shaft remain clean, dry,

and free of grease and oil.

6. Apply a small amount of Loctite

No. 271 to the

threads of the center screw. Install the center

screw, with the washer and retainer, to the center

shaft. Torque the screw to 7.4-8.5 N·m

(65-75 in. lb.).

7. Tension the spring and install the rope and handle

as instructed in steps 6 through 12 under “Rope

Replacement” on page 7.2.

8. Install the starter to the engine blower housing as

instructed in “To Install Starter” on page 7.1.

1 2 ... 111 112 113 114 115 116 117 118 119 120 121 ... 217 218

No comments

Kohler COMMAND CH18-745 User Manual Page 116