Kohler COMMAND CH18-745 User Manual download pdf (Page 146)

8.29

Section 8

Electrical System and Components

Figure 8-41. Removing Solenoid Screws.

3. If the solenoid was mounted with Phillips head

screws, separate the solenoid and plunger spring

from the drive end cap. If the solenoid was

mounted with external Torx head screws, the

plunger is part of the solenoid, unhook the plunger

pin from the drive lever. Remove the gasket from

the recess in the housing. See Figures 8-42 and

8-43.

Figure 8-43. Removing Plunger.

4. Remove the two thru (larger) bolts. See Figure

8-44.

Figure 8-42. Solenoid Removed from Starter.

Phillips Head

Screws

Torx Head Screws

1 2 ... 141 142 143 144 145 146 147 148 149 150 151 ... 217 218

No comments

Kohler COMMAND CH18-745 User Manual Page 146