Kohler COMMAND CH18-745 User Manual download pdf (Page 161)

9.8

Section 9

Disassembly

Figure 9-29. Removing the Spark Advance Module

(Applicable Models).

4. Remove the three (each side) hex. flange screws

securing the outer baffles. Note the location of

any lifting strap and position of the two short

screws (one each side on bottom) for reassembly.

See Figure 9-30.

Figure 9-31. Removing Outer Baffles.

5. Remove the outer baffles on both sides. See

Figure 9-31.

6. On engines equipped with a metal grass screen,

remove the screen before removing the blower

housing. See Figure 9-32. Plastic grass screens

can be removed after the blower housing is

removed.

Figure 9-28. Remove B+ Lead from Terminal Plug.

3. The rectifier-regulator does not have to be

detached from the blower housing. If the engine is

equipped with SMART-SPARK

™

the SAM module

should be removed from the cylinder baffle or

blower housing. See Figure 9-29. The module

willing hang loose as part of the wiring harness.

Figure 9-30. Note Location of Two Short Screws.

1 2 ... 156 157 158 159 160 161 162 163 164 165 166 ... 217 218

No comments

Kohler COMMAND CH18-745 User Manual Page 161