Kohler K-13808-CP Installation Guide download pdf (Page 4)

1. Install the Foot Control

Secure the Base

Securely tighten the base to the valve with three ﬂathead screws

(provided).

Connect the lavatory or sink supply to the valve. Refer to the

instructions packed with the lavatory or sink supply.

NOTE: Before securing the base to the ﬁnished wall, make sure that

sufficient reinforcement has been added to the ﬁnished wall.

Using three (3) ﬂathead screws (not provided), secure the base to

the ﬂoor.

Connect the Supplies

Apply thread sealant to both the hot and cold water supplies.

Connect the hot and cold water supplies to the valve.

Fit the cover in place over the valve and base.

NOTE: If the foot pedals make contact with the cover, the height of

the foot pedals must be adjusted. Remove the cover from the valve

Secure to

floor.

Secure to

floor.

Base

Supply

Valve

Key

Cover

Flathead

Screw

Valve

and

Base

Valve

and

Base

Plated Screw

Hot and

Cold Water

Supplies

Hex Nut and

Adjustment Screw

105344-2-AD 4 Kohler Co.

1 2 3 4 5 6 7 8 9 ... 15 16

No comments

Kohler K-13808-CP Installation Guide Page 4