Kohler K-6332-BL Installation Guide download pdf (Page 4)

2. Install the Supplies

CAUTION: Risk of restricted waterﬂow and product

damage. Use extreme care to avoid kinking and twisting the

supply hoses. The supply hoses must not be taut after

installation.

NOTE: If the sink is not installed, install it at this time. Be sure to

follow all instructions packed with the sink.

NOTE: If the sink installation requires that you coil the supply hoses

to obtain a good connection, maintain an inside coil diameter of at

least 3″ (7.6 cm).

Carefully position the hot and cold water supplies so they will

not interfere with other hoses or items below the mounting

surface.

Connect and tighten the supply hoses to the supply stops. Left is

hot, right is cold.

3. Flush the Supply Lines

Place the valve outlet hose into a bucket or suitable container.

Slowly turn on the hot and cold supplies.

Slowly turn the faucet handle to the full cold position. Let the

water run brieﬂy to remove any debris.

Slowly turn the faucet handle to the full hot position. Let the

water run brieﬂy to remove any debris.

Turn the faucet handle to the OFF position.

3" (7.6 cm)

or Larger

Cold

Hot

1071380-2-A 4 Kohler Co.

1 2 3 4 5 6 7 8 9 ... 23 24

No comments

Kohler K-6332-BL Installation Guide Page 4